The temperature for baking coils in a motor drying oven is generally around 120 degrees Celsius. Motor drying ovens and explosion-proof ovens work on the same principle: preventing explosions during drying and heating. Motor drying ovens are designed for the motor industry and are mainly used for motor painting, transformer painting, and curing some wires. They have a wide temperature range, rapidly increasing from room temperature to 300 degrees Celsius and maintaining a constant temperature. The system is automated, convenient, and safe to use.
When using a motor drying oven, paying attention to certain details can prevent accidents. The oven has an explosion-proof system to prevent accidents. The heating element should not be placed at the bottom. The exhaust and intake devices must be properly adjusted. Before use, check that all indicators meet standards and that electrical insulation is adequate. Set appropriate high-temperature warning settings to reduce the risk of accidents. Always exercise caution. Before use, carefully read the user manual, which contains many instructions on how to use the equipment, or seek guidance from a professional to ensure safety.
Safety first. Motor drying ovens are mainly used for heating and pre-treatment of motor coils and motor windings in the motor industry. Motor drying ovens are a type of explosion-proof drying oven, with an explosion-proof pressure relief door installed on the back of the oven. The door automatically opens to release pressure when the pressure inside the oven is too high.