Raw Material Barrel Heating Oven

Raw material barrel heating oven is specialized for 200L raw material barrels, ton barrels, and all kinds of raw materials dissolution and constant temperature plus the use of heating box, with precise temperature control, temperature deviation is small, high safety factor, heating and constant temperature when the raw material is heated evenly, to ensure that the quality of raw materials and reliable performance, it is the chemical industry, additives, pharmaceutical intermediates, lubricants, petrochemicals, and other industries, the production of essential equipment.

Raw material heating oven is divided into ordinary type and explosion-proof type two production methods, explosion-proof type can be used for all kinds of flammable and explosive products and areas, explosion-proof method using standard explosion-proof requirements.

The equipment using convection heating mode, the heating mode has a high heating rate, temperature uniformity is good, installed in the air duct heater through the top of the box circulating fan forced air supply, the temperature emitted by the heater into the studio, and forced to act on the surface of the material barrel, so that it is rapid conduction of the heat, the top of the studio back to the role of the role of the reduced temperature of the hot air sucked back to the air ducts again after the heater warmed up and sent to the studio, and so on and so forth constitutes a circulatory system. After the heater to warm up the temperature into the studio, and so on and so forth constitute a circulatory system.

Oven temperature automatic temperature control, instrumentation according to the signal collected by the transmitter, instrumentation P.I.D automatic calculation of temperature control original (proportional control valve, angle seat valve, solenoid valve, thyristor) on and off time, to achieve the purpose of accurate temperature control, instrumentation can also be installed DCS communication interface, to facilitate remote monitoring and control operations. The control of the equipment is equipped with monitoring and protection devices, when the main control components are damaged or out of order causing the temperature to go out of control, the monitoring detects the temperature abnormality and cuts off the heating source in an emergency and sends out sound and light alarms, so as to ensure the safety of the raw materials and equipment.

It adopts channel steel as the skeleton, and the shell is covered with thin plate (stainless steel, galvanized plate, Q235 cold-rolled steel plate), which has a stable and solid structure and ensures that it will not be deformed under long-term heavy load.

The raw material barrel heating oven can be stacked double-layer internal use, can save equipment footprint, the upper stacked layer can be placed directly on the lower barrel, can also be added to the upper shelf, for the box of different raw materials loading and taking operation is more convenient. Equipment studio three sides of the installation of anti-collision devices, can effectively prevent the loading of forklifts on the box impact, thus protecting the box from damage.

Hot Tags: raw material barrel heating oven, China raw material barrel heating oven manufacturers, suppliers, factory, high temperature data logger oven, scientific drying oven, rotary cone vacuum dryer working principle, Hot Air Circulation Oven, thermal oil deck oven, oil drum pizza oven for sale